No longer available
Alternatives displayed on the right
Insulated bend Econox Thermoduct Ø 200 mm 30°
Bend 30°
{{ description }}
You save {{ discount.percentage }}%
{{ this.lastAddedShoppingCartItem.productable ? this.lastAddedShoppingCartItem.productable.displayName : '' }}
{{ lastAddedShoppingCartItem.productable.brand.display_name }}
Art. nr.: {{ lastAddedShoppingCartItem.productable.sku }}
{{ description }}
- Guaranteed airtight
- Simple installation
- Equipped with rubber and vapour-tight sealing tapes
Description
Thermoduct is an air duct system from Econox with a high-quality insulation jacket. It is excellent for connecting heat recovery units and heat pumps. Thermoduct is the right solution for installations that have to meet strict noise requirements. Placing a bend makes it possible to lay a ventilation duct in a corner or curve. In addition to the Thermoduct bend 30°, Econox also offers bends of 45° and 90°.
The Thermoduct products are equipped with sealing rubber and closing straps as standard, which means that the Thermoduct fittings achieve a high airtightness class. Moreover, the Thermoduct bend is easy to install: thanks to the safe rubber seal and the handy sealing bands, there is no need to tape. The inner duct is also galvanically treated and therefore easy to clean. The use of the insulating jacket reduces noise in ventilation ducts, resulting in a low-noise ventilation system. This Thermoduct bend of the brand Econox is made of steel and the insulation material Polyethylene foam (PE). This specific Thermoduct bend has a diameter of Ø 200 mm, the bend angle is 30 degrees with a bend radius of 54 mm.
With the help of the insulated Thermoduct bend 30° in our range, the ventilation system can be assembled as desired and closed perfectly. The insulation material of this product prevents condensation and heat loss, which is essential for a sustainable and optimally functioning heat recovery ventilation system.
Specifications
Intovent article number | ITV020223 |
Manufacturer item number | 10100304 |
Brand | Econox |
Material | Steel |
Surface protection | Sendzimir galvanized |
Nominal diameter (mm) | 200 |
Production method | Other |
Connector, connection 1 | Sleeve with seal |
Connector, connection 2 | Sleeve with seal |
Colour | Grey |
Insulated | Yes |
Insulation material | Other |
Model | Segmental bend |
Bend angle (°) | 30 |
Bend radius (mm) | 54 |
Length of connection 1 (mm) | 30 |
Working length connection 1 (mm) | 30 |
Length of connection 2 (mm) | 30 |
Working length connection 2 (mm) | 30 |
Model | Externally insulated duct |
Material duct | Steel |
Material insulation | Other |
Insulation thickness (mm) | 0.5 |
Outer surface protection | Sendzimir galvanized |
Outside colour | Grey |
Nominal duct diameter (mm) | 200 |
Connection 1 | Duct end |
Connection 2 | Duct end |
Bend model | Segmental bend |
Bend radius (number x D) | 54 |
GTIN | 08719544000132 |
Outer surface protection | Sendzimir galvanised |