No longer available
Alternatives displayed on the right
Insulated bend Econox Thermoduct Ø 180 mm 90°
Bend 90°
{{ description }}
You save {{ discount.percentage }}%
{{ this.lastAddedShoppingCartItem.productable ? this.lastAddedShoppingCartItem.productable.displayName : '' }}
{{ lastAddedShoppingCartItem.productable.brand.display_name }}
Art. nr.: {{ lastAddedShoppingCartItem.productable.sku }}
{{ description }}
- Guaranteed airtight
- Simple installation
Description
Designed with a high-quality insulation jacket, Thermoduct is an air duct system from Econox. It is the perfect system for connecting heat pumps and heat recovery units. A Thermoduct piping system is the ideal solution for installations that require strict noise control. With its smooth design, the system offers no more resistance than traditional air ducts. The complete insulated pipe system program from Econox consists of pipes and various fittings. Placing a bend makes it possible to lay a ventilation duct in a corner or curve. In addition to Thermoduct bend 90°, Econox also offers bends of 30 and 45 degrees.
The Thermoduct products are equipped with sealing rubber and closing straps as standard, which means that the Thermoduct fittings achieve a high airtightness class. Moreover, the Thermoduct bend is easy to install: thanks to the safe rubber seal and the handy sealing bands, there is no need to tape. The inner duct is also galvanically treated and therefore easy to clean. Due to the acoustic properties of the insulation jacket, the noise in ventilation pipes is reduced, resulting in a low-noise ventilation system. It is made of steel and Polyethylene foam (PE) insulation material. This specific Thermoduct bend has a diameter of Ø 180 mm and a bend angle of 90° with a bend radius 175 mm.
With the help of the insulated Thermoduct bend Bend 90° in our range, the ventilation system can be assembled as desired and closed perfectly. The insulation material of this product prevents condensation and heat loss, which is essential for a sustainable and optimally functioning heat recovery ventilation system. Ask about our options if an article is not listed. Ordering insulated bend Econox Thermoduct ø 180 mm online is quick and easy at Intovent.
Specifications
Intovent article number | ITV020206 |
Manufacturer item number | 10100203 |
Brand | Econox |
Material | Steel |
Surface protection | Sendzimir galvanized |
Nominal diameter (mm) | 180 |
Production method | Other |
Connector, connection 1 | Sleeve with seal |
Connector, connection 2 | Sleeve with seal |
Colour | Grey |
Insulated | Yes |
Insulation material | Other |
Model | Segmental bend |
Bend angle (°) | 90 |
Bend radius (mm) | 175 |
Length of connection 1 (mm) | 30 |
Working length connection 1 (mm) | 30 |
Length of connection 2 (mm) | 30 |
Working length connection 2 (mm) | 30 |
Model | Externally insulated duct |
Material duct | Steel |
Material insulation | Other |
Insulation thickness (mm) | 0.45 |
Outer surface protection | Sendzimir galvanized |
Outside colour | Grey |
Nominal duct diameter (mm) | 180 |
Connection 1 | Duct end |
Connection 2 | Duct end |
Bend model | Segmental bend |
Bend radius (number x D) | 175 |
GTIN | 08719544000071 |
Outer surface protection | Sendzimir galvanised |