Zehnder ComfoAir E 300 MVHR unit - 300 m³/h - RF receiver

Perilex connection - Right variant

  • Contributes to a healthy indoor climate
  • Prevents moisture and mould problems

Description

The Zehnder ComfoAir E is a quiet and energy-efficient heat recovery system (MVHR). Easy to install, the ComfoAir E 300 has a capacity of 300 m³ /h and achieves a thermal efficiency of 98,6%.


This ComfoAir E 300 L RF has a left-side supply, a protected euro plug and can be operated wirelessly thanks to an RF receiver.


Thanks to an intelligent bypass, the ComfoAir E can detect whether it is summer or winter. In the winter, the system's heat exchanger provides heat recovery: the outgoing air flows through the small air channels, passing the colder outside air to warm the air entering the house. Is the outdoor temperature lower than the indoor temperature in summer? Then the reverse happens, the cooler outside air is fed into the house and provides free cooling.


Please note: the product will be delivered on a pallet .

Specifications

Intovent article number ITV050132
Manufacturer item number 471508020
Brand Zehnder
Housing material Steel coated
Suitable for wall mounting Yes
Suitable for ceiling mounting No
Suitable for floor mounting Yes
Max. air volume at 50 Pa (m³/h) 300
Max. air volume at 100 Pa (m³/h) 300
Max. air volume at 150 Pa (m³/h) 300
Max. air volume at 200 Pa (m³/h) 300
Max. air volume at 250 Pa (m³/h) 300
Max. air volume at 300 Pa (m³/h) 300
With thermal overload protection Yes
Type of motor Electronically commutated (EC)
Voltage (V) 230
Frequency (Hz) 50
Number of phases 1
Electrical connection Connecting cord with plug with protective contact
With digital display Yes
Supporting protocol for Modbus No
With wired control unit No
Suitable for wired control unit Yes
Suitable for wireless remote control Yes
With zone controller No
Suitable for zone controller Yes
With heating element Yes
With internal humidity (RH) sensor No
Suitable for (extra) humidity (RH) sensor Yes
With internal carbon dioxide (CO2) sensor No
Suitable for (extra) carbon dioxide (CO2) sensor Yes
Suitable for central heating boiler connection No
With bypass Yes
With constant pressure control No
With constant volume flow control Yes
Type of frost protection Heating element
Connections outdoor air side Insert-/duct end
Connections residential side Insert-/duct end
Residential connection, underside No
Residential connection, left side No
Residential connection, right side No
Residential connection, top Yes
Roof connection, side No
Roof connection, top Yes
Supply filter according to ISO 16890-1:2016 ISO Coarse
Efficiency supply filter according to ISO 16890-1:2016 (%) 65
Exhaust filter according to ISO 16890-1:2016 ISO ePM1
Efficiency exhaust filter according to ISO 16890-1:2016 (%) 55
Height (mm) 810
Width (mm) 725
Depth (mm) 570
Energy efficiency class A+
Type of speed control 3 positions
Intovent recommends No
Nominal duct diameter (mm) 160
Nominal duct diameter (mm) 190
Left/right orientation reversible No
Fuse size of the device (A) 7.02
Suitable for wired control unit No
Weight (kg) 45
GTIN 08717573904803
Electrical connection Connecting cable with plug with protective contact
Electrical connection Connecting cable with plug w/protective contact
Max. air volume at 50 Pa (Cubic metre per hour) 300
Max. air volume at 100 Pa (Cubic metre per hour) 300
Max. air volume at 150 Pa (Cubic metre per hour) 300
Max. air volume at 200 Pa (Cubic metre per hour) 300
Max. air volume at 250 Pa (Cubic metre per hour) 300
Max. air volume at 300 Pa (Cubic metre per hour) 300
Voltage (Volt) 230
Frequency (Hertz) 50
Fuse size of the device (Ampere) 7.02
Nominal duct diameter (Millimetre) 160
Nominal duct diameter (Millimetre) 190
Efficiency supply filter according to ISO 16890-1:2016 (Percentage) 65
Efficiency exhaust filter according to ISO 16890-1:2016 (Percentage) 55
Height (Millimetre) 810
Width (Millimetre) 725
Depth (Millimetre) 570
Weight (Kilogram) 45

Technician needed?

Our best people at your service

View services

Downloads