Set wireless RF remote control Brink 4-settings

Description

Set with wireless RF remote control with 4 settings (1 transmitter & 1 receiver) from the Brink brand, including batteries and RJ12/6 connector. This controller is suitable for use with various Brink residential fans:

• Renovent Elan
• Renovent Excellent
• Renovent Sky
• Flair 200
• Flair 300
• Flair 400
• Air 70

This RF controller has been available since 2017 and cannot be combined with Brink's old RF controllers (art. 531785, 531786, 531787, 531788 and 531789).

Receiver:

The receiver comes standard with a modular cable with an RJ12/6 connector. This connector should be inserted, via the splitter, into the black connector on top of the MVHR unit. The receiver is now powered with 24 volts from the MVHR unit. After the receiver is connected to the unit, the transmitters should be connected within 3 minutes. Up to 32 transmitters can be logged on to one receiver.

Transmitter:

This transmitter has 4 settings and, thanks to a dot in the centre of the control, you also get an indication of when your MVHR unit's filters need replacing.

• Press top left: Device runs in setting 1
• Press lower left: Device runs in setting 2
• Press top right: Device runs in setting 3
• Under press 1x short (< 3 sec.): Unit runs for 15 minutes in setting 3 and then switches back to setting 1
• Under press 2x short (< 3 sec.): Unit runs for 30 minutes in setting 3 and then switches back to setting 1
• Under press 3x short (< 3 sec.): Unit runs for 45 minutes in setting 3 and then switches back to setting 1