Spiral duct bend Ø 100 mm 30°

Round bend 30° | Rubber seal

  • Guaranteed airtight
  • Simple installation

Description

A spiro duct bend is a galvanised steel fitting used to create an ideal ventilation system for supplying and extracting air. Thanks to a smooth inner wall, airflow is impeded as little as possible. This allows the ventilation system to function optimally. Ideal for installing a ventilation system in a bend or corner.


All our spiro ducts and galvanised fittings, including this spiro duct bend, meet the highest airtightness quality standards, class D. This is thanks to a rubber seal. This bend from the Interduct brand is made of: steel. In our product range you will find bends from 15, 30, 45, 60 and 90 degrees with a diameter of 100 mm. This bend has a diameter of Ø 100 mm and a bend angle of 30 degrees.


You easily mount and lock to the ventilation system with the bends from our collection, equipped with a rubber seal. Contact us for professional advice if you have any questions regarding fittings and the use of spiro ducts.

Specifications

Intovent article number ITV010306
Manufacturer item number BX3.100
Brand Interduct
Material duct Steel
Nominal duct diameter (mm) 100
With pre-mounted seal Yes
Bend model Smooth bend
Bend angle (°) 30
Bend radius (number x D) 1
Insert length (mm) 35
Air tightness class according to EN 1751 D
Intovent recommends No
Nominal duct diameter (Millimetre) 100
Bend angle (Degrees) 30
Insert length (Millimetre) 35

Technician needed?

Our best people at your service

View services

Alternatives

See all alternatives

Suspension bracket for spiral duct Ø 100 mm

Galvanised | Rubber seal

  • Steel

5 02

Spiral duct bend Ø 100 mm 90°

Round bend 90° | Rubber seal

  • Steel

6 80

Spiral duct Ø 100 mm L = 1 m

Length: 1000 mm

  • Uninsulated duct

5 99

Coupler for spiral duct Ø 100 mm

Joint | Rubber seal

  • Steel

3 75